home

products

construction

steep roof diffusion sealed

steep roof open diffusion

steep roof accessories

puren wedge insulation

puren compression-proof
for rooftop car parks

flat roof accessories

home | products | construction | flat roof

puren MV

Edges
blunt
Format
external dimensions 1200 x 600 mm
fitting dimensions 1200 x 600 mm

Edges
with stepped profile (from 40 mm thickness)
Format
External dimensions 1200 x 600 mm
Fitting dimensions 1185 x 585 mm

The inexpensive basic element is particularly suitable for cost-efficient insulation of flat roofs such as trapezoidal, green and patio roofs.

Advantages:

	Low additional height through high insulation performance
	Saving cost because of shorter fastening elements
	Can be laid in hot asphalt
	Safe processing of roofing foil by pouring and rolling or welding it in
	Insulating sheets may be used either way up for cost-efficient fitting with low off-cut waste
	Can be used from -20 °C to +90 °C
	Limit to short-term temperature exposure: +250 °C
	Compressive strength at 10 % compressive deformation in accordance with DIN EN 826 100 kPa
	Water absorption acc. to DIN EN 12087: approx. 3 % by volume
	Non-resistance, suitable for installing into high-stress surfaces such as parking roofs
	When laid onto trapezoidal corrugated steel, the insulation will not be torn when stepped on
	Laminated roof structures offer high resistance to wind suction forces
	Low additional load on the roof construction
	High age-resistance
	Resistant to chemicals and solvents typically used in building & construction

A U-value of 0.27* can be achieved with a thickness of just 100 mm.

Download PDF document
Technical Data (88 KB)
Flat roof thermal insulation (292 KB)
Flat roof installation instructions (195 KB)
Flat roof design & engineering details (1190 KB)
Form form (60 KB)
Calculation of diffusion and thermal insulation (51 KB)
Price list (1220 KB)

puren MV TCG (WLS) 028/030
PUR/PIR (polyurethane) rigid foam insulating element, CFC- and HCFC-free, DIN EN 13165, thermal conductivity grades (WLS) 030 (d < 80 mm) and 028 (d 80 mm), B2 class building material, application type PUR 028 DAA dh or PUR 030 DAA dh, with double-sided diffusion-open special fleece coating.

Double-sided, diffusion-open special fleece coating with perforated surface
High-performance PUR/PIR rigid foam, available in thicknesses from 20 mm to 160 mm
With stepped profile available from 40 mm thickness

If you need more information: Contact our regional sales manager.

* Thermal transfer resistances RSI and RSE are considered. Other project-specific features, such as those in accordance with DIN EN ISO 6946, are not taken into account.